Eriez Headlines

Eriez Europe releases new corporate video

Eriez Europe releases new corporate video

Eriez releases new video showcasing their impressive facilities in South Wales.

Eriez Europe continues to expand despite Brexit uncertainty

Eriez Europe continues to expand despite Brexit uncertainty

Eriez are investing $425,000 in a new rotor manufacturing facility

Eriez Europe Achieves ISO 9001:2015 Quality Standard

Eriez Europe Achieves ISO 9001:2015 Quality Standard

Eriez’ continuous commitment to customer satisfaction has been strengthened with the upgrade of their ISO 9001:2008 certification to the new ISO 9001:2015 standard for its business and quality management systems.

First Eriez Xtreme® Metal Detector sold in UK

First Eriez Xtreme® Metal Detector sold in UK

JE Hartley, a frozen food supplier, has purchased the first Xtreme® Metal Detector in the UK for their manufacturing process line.

Suspended overband magnets separate Eriez Europe from competition

Suspended overband magnets separate Eriez Europe from competition

Viridor has recently installed two of Eriez’ impressive Multi Pole (MP) suspended magnets at their new £223m Energy Recovery Facility in Cardiff, South Wales.

Eriez Hydroflow at MACH 2016

Eriez Hydroflow at MACH 2016

Eriez will be showcasing a range of fluid filtration and recycling systems on stand 5989 at MACH 2016 from the 11th to 15th April at the NEC in Birmingham, UK.

Eriez strengthens its engineering team

Eriez strengthens its engineering team

Eriez Europe appoints Glenn Kiernan to the position of Engineering Manager.

Eriez launches new dedicated recycling test centre

Eriez launches new dedicated recycling test centre

Eriez Europe launches a pioneering, purpose-built recycling separation test centre.

Ez-TEC 9100 all metal separator on plastic process line

Ez-TEC 9100 all metal separator on plastic process line

Discover how Eriez helped UK polymer compound  manufacturer upgrade its process line by installing Ez-Tec 9100 all metal separators at critical stages of its production to ensure metal-free high quality products. The Ez-Tec 9100 is a high sensitivity all metal balanced coil technology metal separator, equipped with a quick-acting pneumatic reject mechanism. Read more...

Double Stage Rare Earth Magnetic Drum Produces the Highest Level of Purity

Double Stage Rare Earth Magnetic Drum Produces the Highest Level of Purity

Eriez Europe installation of its rare earth magnetic drum separation system enable
world leading producer of ceramics products to reduce the ferrous contamination of its very fine (> 0.5mm particle size) refractory cullet to less than 120ppm of Fe whilst maintaining a throughput of 1,000 kg per hour by using a self-cleaning system.

Xtreme® Metal Detector raises the standard

Xtreme® Metal Detector raises the standard

Eriez new Metal Detector surpasses previous units and competitive models thanks to its enhanced features. Read more.

See our equipment at Pollutec Lyon

See our equipment at Pollutec Lyon

Eriez is exhibiting at Pollutec Lyon Eurexpo  2-5 December to show off new advances in eddy current separation for non ferrous metal recycling and recovery, enabling waste processors and scrap yards to recover a very high level of nonferrous metal from waste material fines and thus increasing revenues.

Visitors at our stand at POLLUTEC 2014, Hall 3 Aisle G Stand 256 will able to see test samples on the RevX-E ST22, specially ftted with fines splitter plate. Our bilingual team will be able to discuss with you the benefit of Eriez eddy current separators to recover valuable nonferrous metals.

Eriez Xpress programme for fast shipment on magnetic separation

Eriez Xpress programme for fast shipment on magnetic separation

Eriez Xpress programme provides fast shipment on the most common magnetic separation equipment in the industry. The new Eriez Xpress programme will enable for faster processing of customer requirements. A perfect solution for situations where there's no room for delay. 

RevX-E eddy current separator enjoys great success

RevX-E eddy current separator enjoys great success

Eriez has sets new standard in fines separation with its newest eddy current separators range, enabling metals recovery where it was not possible before. Combining exceptional magnetic circuitry, a special carbon-fibre shell and a specially designed splitter, the Rev-X delivers the greatest separation of non-ferrous fines in the market. Contact us at info@eriezeurope.co.uk to test your samples and get a unit specified to your applications to start earning from your fine waste material.

Discover Eriez new Rare Earth Overband Magnet at HIILLHEAD

Discover Eriez new Rare Earth Overband Magnet at HIILLHEAD

Eriez Europe presents its band-new Rare Earth Suspended Permanent Magnet at Hillhead 2014 - 24th to 26th of June in Buxton, UK. Read more...

Visit Eriez Hydroflow Europe at MACH 2014

Visit Eriez Hydroflow Europe at MACH 2014

 Hydroflow Europe will present its range of coolant filtration and recycling system at MACH 2014 (7-11 April 2014)

Eriez Europe at SRR Madrid

Eriez Europe at SRR Madrid

Eriez presents its eddy current separator and other equipment to the Spanish recycling industry. Visitors are welcome to bring their sample and experience its efficiency first-hand. Eriez in partner with MUNCKERSA of Spain will display the ST2 REV-X eddy current separator, a TP20/100 overband permanent magnet and its Prograde ferrite drum.

Visitors are welcome to bring their own samples to experience the REV-X effective separation.

Eriez shows off new separators at IFAT

Eriez shows off new separators at IFAT

Three innovative products which push back the boundaries of recycling will be the centre of attention on the Eriez stand at IFAT 2014 in Munich this spring. Eriez has produced two different versions of the RevX-E; the ST2 for materials typically between 25mm and 150mm in diameter and the ST22 for fines smaller than 25mm. Both will be on show at IFAT – so why not bring along a sample of your own to see how well our RevX-E separates them? The Eriez Europe and Eriez Germany teams will be on Stand 232 in Hall C1 and some of our senior colleagues from our parent company in USA will be in attendance too.

Eriez presents the new Shred 1 into Europe

Eriez presents the new Shred 1 into Europe

Eriez Europe present the new Shred1™ Separator which uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post Magnetic Drum flow in scrap processing lines.

This powerful and innovative separator delivers three distinct fractions with the first being a high value, low-copper content ferrous product. This valuable shred represents more than 70% of the flow and contains less than 0.2% of copper.

The second fraction represents less than 20% of the flow and contains mostly mixed metals, copper and aluminium with steel housings or cores. Hand sorting of this fraction can be accomplished with relatively few pickers.

The final low volume fraction representing less than 7% of the flow consists of heavy steel objects and light material such as fluff, rubber and some wire. This fraction can also be easily picked or sorted.

Eriez PokerSort recovers troublesome rod shaped metals

Eriez PokerSort recovers troublesome rod shaped metals

As part of its dedication to continually advancing and transforming the metals recycling industry, Eriez introduces the PokerSort into the European recycling market. Using a special design permanent magnetic drum, the PokerSort to help alleviate issues caused by long rod-like pieces of ferrous metals, that can damage downstream equipment in automobile and other scrap metal operations. Click here for more information

ProGrade™ Magnets on offer from Eriez

ProGrade™ Magnets on offer from Eriez

Eriez offer a wide range of Magnetic Separators, Metal Detectors and Vibratory Feeders that are available for despatch immediately.

All ProGrade™ items are of high quality but still remain to be competitively priced.

Discover Eriez Xtreme® Metal Detector

Discover Eriez Xtreme® Metal Detector

 Eriez launches the Xtreme® metal detector, designed to surpass previous units and competitive models alike. It combines simplicity and sophistication with its easy-to-navigate control features.  Find out more. 

Eriez Europe at K 2013 - plastics and rubber

Eriez Europe at K 2013 - plastics and rubber

At K2013, Eriez will present a selection of its metal separation and detection systems, specifically designed for the plastics and rubber industry. A demonstration of Polymag, Eriez plastic additive, will also be available using Eriez rare earth roll separator.  The PolyMag additive allows plastic moulders and extruders to produce metal detectable and X-Ray visible plastic parts, ideal for suppliers to the food industry and to reduce scrap of expensive resins. 

Bauma 2013

Bauma 2013

Visit Eriez Magnetics at Bauma 2013 from 15th - 21st April in Munich, Germany. On the booth there will be a self cleaning Permanent Overband Magnet for the automatic removal of ferrous metals, and an Industrial Metal Detector to detect any metals, thus protecting downstream equipment. Contact Eriez Magnetics (info@eriezeurope.co.uk) to arrange a meeting at the show to discuss your applications. See us at booth 200 in hall B2

Visit Eriez at CARS 2012

Visit Eriez at CARS 2012

 Visit the CARS show in the UK between the 14th and 16th of June to the see the latest Magnetic Separators and Metal Sorters that Eriez supply for the auto recycling and metal recycling industries. On their stand Eriez will have a working RevX-E LT Eccentric Eddy Current Separator along with information on the new Shred1™ Ballistic Separator that was launched at IFAT 2012 in Munich and other widely used equipment for recycling industries. See Eriez at stand C14/15

See Eriez at IFAT 2012

See Eriez at IFAT 2012

Visit Eriez on stand 303/402 in hall B2 to see the new Shred 1, ProSort II, New Generation Eddy Current Separators and Metal Detection equipment for the Recycling and Waste Management industry.

Visit Eriez at Ceramitec 2012

Visit Eriez at Ceramitec 2012

Eriez Europe will be appearing at Ceramitec 2012 in hall B6 stand 214. During the exhibition Eriez will be showcasing a range of different products including HI Filters, Rare Earth Roll, ProGrade Grates, The AKC (Automatic Kwik Clean Grate) and new 15K-RE Super Strength Tube Magnets.

Eriez Support Company Growth with the Purchase of a New Building

Eriez Support Company Growth with the Purchase of a New Building

Eriez Europe has announced that the company has purchased a 19,000 square foot building located next door to their current premises in Caerphilly, South Wales.

Despite the current economic climate, Eriez Europe has continued to show growth. An increased order base has resulted in a heavier manufacturing demand and hence more space required to facilitate this.

Facebook LinkedIn YouTube